Load data for .22 Rem. Jet Mag. + .222 | 60gr | Hornady V-MAX

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.222 \| 60gr \| Hornady V-MAX
Manufacturer SKU:	2207
Bullet Weight:	60gr \| 3.9g
Bullet Diameter:	0.222" \| 5.64mm
Bullet Length:	<<locked>>
Caliber:	.22 Rem. Jet Mag. load data
Case Length (l3):	1.278" \| 32.5mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	18.5 Grains of Water \| 1.20 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	36985 psi \| 2550 bar
LID:	LID_B2497_C89
Last updated:	2026-01-31

Load data for 38 loads in caliber .22 Rem. Jet Mag. with .222 | 60gr | Hornady V-MAX bullet and 19 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	68%	33011	89%	**06	100%
[Accurate 4100]*	<<locked>>	69%	32750	89%	**68	88%
Alliant 2400	<<locked>>	66%	32967	89%	**85	91%
Alliant BLUE DOT	<<locked>>	68%	32750	89%	**49	97%
Alliant Herco	<<locked>>	67%	32590	88%	**17	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	71%	33199	90%	**16	100%
[Hodgdon H110]*	<<locked>>	73%	33156	90%	**94	84%
Hodgdon LilGun	<<locked>>	75%	33286	90%	**40	91%
Hodgdon TrailBoss	<<locked>>	97%	26020	70%	**65	100%
Ramshot Enforcer	<<locked>>	66%	33054	89%	**91	92%
ReloadSwiss RS 14	<<locked>>	97%	25222	68%	**84	100%
[ReloadSwiss RS 30]*	<<locked>>	89%	33185	90%	**17	87%
SNPE Vectan BA6 1/2	<<locked>>	91%	33170	90%	**81	94%
SNPE Vectan BA7 1/2	<<locked>>	63%	32750	89%	**50	100%
[Somchem S265]*	<<locked>>	81%	32880	89%	**49	83%
Vihtavuori 3N38	<<locked>>	65%	33185	90%	**39	99%
Vihtavuori N105	<<locked>>	68%	32866	89%	**45	100%
Vihtavuori N110	<<locked>>	83%	33170	90%	**98	91%
Vihtavuori N32C Tin Star	<<locked>>	74%	32837	89%	**40	100%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26716	72%	**94	100%
[Accurate 4100]*	<<locked>>	61%	25048	68%	**04	82%
[Alliant 2400]*	<<locked>>	61%	28485	77%	**80	88%
Alliant BLUE DOT	<<locked>>	62%	27035	73%	**40	94%
Alliant Herco	<<locked>>	61%	28311	77%	**45	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	62%	26716	72%	**20	100%
[Hodgdon H110]*	<<locked>>	69%	27963	76%	**93	80%
[Hodgdon LilGun]*	<<locked>>	62%	20740	56%	**52	80%
Hodgdon TrailBoss	<<locked>>	62%	14214	38%	**2	100%
[Ramshot Enforcer]*	<<locked>>	61%	27122	73%	**57	88%
ReloadSwiss RS 14	<<locked>>	61%	13503	36%	**9	100%
[ReloadSwiss RS 30]*	<<locked>>	80%	25077	68%	**50	80%
[SNPE Vectan BA6 1/2]*	<<locked>>	66%	16708	45%	**88	80%
SNPE Vectan BA7 1/2	<<locked>>	60%	30632	83%	**21	100%
[Somchem S265]*	<<locked>>	76%	28631	77%	**67	80%
Vihtavuori 3N38	<<locked>>	62%	29660	80%	**80	98%
Vihtavuori N105	<<locked>>	61%	26542	72%	**34	99%
[Vihtavuori N110]*	<<locked>>	65%	19624	53%	**86	80%
Vihtavuori N32C Tin Star	<<locked>>	61%	24816	67%	**22	100%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data